What is a flange yoke?
Flange Yokes are commonly used to connect a driveline to the Companion Flange on the transmission, transfer case or differential in a variety of vehicles. They are also used on auxiliary powered equipment attaching to pto, pump, compressor and blower input or output shafts.
What is a driveshaft yoke?
A yoke is a device that unites, couples, or connects. As it relates to driveshafts, a yoke is the basic torque input and output component. The yokes illustrated in Figures 9 and 10 are “tube or weld yokes”. A tube or weld yoke is a yoke incorporating a locating diameter that aligns a tube or other driveshaft member.
What does a yoke do on a truck?
What does a yoke slip eliminator do?
A slip yoke eliminator, abbreviated SYE, does what the name suggests: It eliminates the slip yoke from the transfer case. Instead, it turns it into a fixed yoke that does not slide.
What is the yolk on a driveshaft?
How do you tell what U-joint I have?
You will need to measure from the edge of one snap ring groove straight across to the edge of the other snap ring groove. For U-joints with outside snap rings, you will need to measure from the edge of one u-joint cap straight across to the edge of the other u-joint cap.
How big are the bolts on a U-joint yoke?
The bolts with the strap-and-bolt attachment are only 1/4 inch in diameter and are somewhat prone to breaking. With a U-bolt type yoke, the U-bolt is 5/16-inch stock, which tends to hold up much better. Some people have been able to drill out the holes in the yoke of their u-joint strap style yoke to insert u-joint u-bolts instead.
What are the dimensions of a flange yoke?
Flange Yoke, Steel, Spicer 1310, 3.50 in. Flange Yoke Bolt Circle Diameter, Each Flange Yoke, Steel, Female Pilot Type, Spicer 1310, 1.000 in. Hub Bore, 3.875 in. Flange Diameter, Each
What is the difference between strap-and-bolt and U-joint?
The bolts with the strap-and-bolt attachment are only 1/4 inch in diameter and are somewhat prone to breaking. With a U-bolt type yoke, the U-bolt is 5/16-inch stock, which tends to hold up much better. Some people have been able to drill out the holes in the yoke of their u-joint strap style yoke to insert u-joint u-bolts instead.
What is a universal bearing joint?
It is commonly known for its use on automobiles and trucks. A universal joint in its simplest form consists of two shaft yokes at right angles to each other and a four point cross which connects the yokes. The cross rides inside the bearing cap assemblies, which are pressed into the yoke eyes.