What is a ham radio phone patch?
An autopatch, sometimes called a phone patch, is a feature of an amateur radio (or other type of two-way radio) repeater or base station to access an outgoing telephone connection.
How does a phone patch work?
A Phone Patch allows two way communication with the client A Phone Patch is a electronic box that allows you to connect your mixer or digital audio interface to standard telephone lines. When you talk into your microphone the mic signal is routed to the telephone as if you are speaking into a telephone receiver.
What is a telephone patch?
Phone-patch definition The definition of a phone patch is a device used to temporarily connect a citizen’s band radio with a phone system. An example of a phone patch is how a ham radio user is able to connect someone on a citizen’s band radio line with someone on a regular phone line. noun.
Can you use your phone as a ham radio?
EchoLink. Available on both iOS and Android for free, the EchoLink app turns your smartphone into a HT, and allows you to access a network from your phone. You use the app to connect to the EchoLink system from a cellular or Wi-Fi connection, and then you can track your Ham connections wherever you like.
What is a closed Autopatch repeater?
An Autopatch allows you to make local phone calls from your Amateur Radio, through special control equipment and a telephone line connected to a repeater. Before call phones became ubiquitous, autopatch was extremely popular.
What is Hamshack hotline?
Hamshack Hotline {“HH”} is a private telephone network for Hams by Ham Radio Operators. You must be an ham radio operator to get assign for an HH telephone number. There is a strictly non-commercial use clause in the operating rules, so you will never get any telemarketers or political call on this phone service.
What is the difference between a patch cable and a crossover cable?
While the patch cable connects two different devices, crossover cables connect two similar devices. If you’re looking to connect similar devices without using hubs or routers, you’ll need a crossover cable.
Can a phone be a two-way radio?
Latency and Battery Drain – Cell Phones are not designed to work like a two way radio. Two way radios are designed to provide immediate communication. The interface of a cell phone to a radio system is a data application.
Can you listen to ham radio on the internet?
PC interfaces can be used to connect a ham radio to the internet. There are several online sites for listening to ham radio broadcasts. These broadcast sites have a variety of quality levels, so you can find something with a higher quality level if you have better bandwidth or want the best possible quality of sound.
What does PL mean in ham radio?
Private Line
PL is the Motorola Abbreviation for “Private Line”. QC is the RCA abbreviation for “Quiet Channel”. CG is the General Electric abbreviation for “Channel Guard”. CTCSS is often referred to as a “PL” tone by many users. Many repeaters require the use of a PL tone to access the repeater.
What does QRZ mean in ham radio?
Who is calling me?
QRZ, the name of the web site, is the “Q” amateur radio code for “Who is calling me?” and corresponds to the site’s purpose of assisting amateur radio operators with the lookup of ham radio call signs from every country in the world.
What does DTMF mean in ham radio?
Dual tone multi-frequency
Dual tone multi-frequency (DTMF) is the sounds or tones generated by a telephone when the numbers are pressed. These tones are transmitted with the voice channel. DTMF is used to control automated equipment and signal user intent, such as the number they wish to dial.
What is AllStar Node?
AllStar is a digital linking network used to link repeaters, or nodes, over the Internet to other repeaters or nodes.
Is a patch cable straight through?
Many networking professionals use the term patch cable to refer to any kind of straight through cable. So a patch cable is often called a straight through cable. In other words, patch cable does not change or swap along its way. Both ends use the same wiring standard: T-568A or T-568B.
Can I use a Ethernet cable as a patch cable?
Yes. In most cases, an Ethernet cable and a patch cable can be the same thing in copper networks. But the later is usually shorter to “patch” in from your patch panel to your switch. For example, there is a need to use 100ft Cat6 Ethernet patch cable to wiring home network.
What does a patch panel connect to?
A patch panel in a local area network (LAN) is a mounted hardware assembly that contains ports that are used to connect and manage incoming and outgoing LAN cables.
What is autopatch on a ham radio repeater?
One important feature of ham radio repeaters is called autopatch, which allows a repeater user to make a telephone call through the repeater. When you access a repeater’s autopatch function, a dial tone appears on the air.
How do ham radio repeaters work?
One important feature of ham radio repeaters is called autopatch, which allows a repeater user to make a telephone call through the repeater. When you access a repeater’s autopatch function, a dial tone appears on the air. Then dial the number, using the numeric keypad on your radio or microphone.
How does the live mic patch work?
The patch simply feeds your live mic voice and any recorded audio you want through an interface (the patch) and directly into your phone line. You can also receive into your computer the voice at the other end of the phone line. It’s what radio stations use for phone interviews.
How does the call recording patch work?
The patch works like this: the client will call you on a specified number and you will hear them in your headset. You will then record using your own equipment and the client will be able to listen and provide real-time feedback. Only your voice will be recorded, not anything the client says through the headset.