What is a K lath screw?
K-lath screws are designed to attach wire lath to light gauge metal or wood. They have self-tapping threads, a self-piercing point and a low-profile head, which is ideal for the installation of these materials.
What are lath screws used for?
Teks Lath Screws provide secure metal-to-metal and metal-to-wood fastening with strong holding power, without the need to pre-drill. Self-tapping threads ensure strong holding power while the zinc plated finish protects the job’s appearance.
What are Tek screws good for?
Tek screws, also called self-drilling screws, are self-tapping fasteners that have a drill bit end allowing them to be used for screwing materials such as wood and metal together without pre-drilling. Tek screws are best fitted with a high-speed impact drive.
Do Tek screws need a pilot hole?
Each Tek screw features a carving piece on its tip, which is what makes self-drilling possible. This means you don’t need to create a pilot hole before the fastener, and it also means your work moves forward efficiently. Plus, Tek screws are versatile.
What is a modified truss head screw?
Modified Truss Head Screws have a 100 degree undercut which creates a larger area beneath the screw’s head for a larger bearing surface. Modified Truss Head Sheet Metal Screws are commonly used in applications fastening to wood.
What does K lath mean?
K-LATH® is the leader in reinforcement for stucco walls and cladding. Since 1944, K-LATH® has produced welded wire and paper-backed reinforcing products for the stucco industry. Indeed the name “K-LATH®” has become a generic term for describing proper stucco reinforcing.
Are lath screws stainless steel?
Also called Lath Screws. Newport Fasteners Wire Lath Modified Truss Head Screws are a stainless steel 305 (18-8) fastener with an extra wide head, twinfast thread and Type 17 Cutting Point. The head consists of an integrally formed washer with a low rounded top that is approximately 75% of the washer diameter.
Are lath screws stainless?
When would you use truss head screws?
Truss head screws are commonly used to attach cabinets to steel studs. They are also used in electronics items and in applications requiring low clearance above the head. Finally, steel truss head screws are used to assemble metal parts that will be used in humid environments.
What is K lath construction?
‘K Lath’ is a kind of reinforced mesh, used to reinforce cladding and stucco walls. Though ‘K Lath’ is a proprietary product, the term is now used to describe a range of reinforced lath construction techniques.
What are lath screws made of?
Also called Lath Screws. Newport Fasteners Wire Lath Modified Truss Head Screws are a stainless steel 305 (18-8) fastener with an extra wide head, twinfast thread and Type 17 Cutting Point.
Will TEKS lath screws rust?
Q:do these scews rust? A: Hi Jim, this is Scott from the Teks product team. You should have no problems with rusting in interior applications when they are not exposed to high levels of moisture. Exterior applications that are exposed to the elements, moisture, coastal environments will rust over time.
Can Tek screws be used in steel?
Larger Tek screws (No. 3 Tek and above) are strong enough to penetrate 12~20-gauge galvanized steel, as well as 3/8” to ½” (10~12.5 mm) structural steel and can be used on various civil and naval engineering applications.