What is bituthene membrane used for?
BITUTHENE® 3000 and BITUTHENE® Low Temperature Membranes are self-adhesive, rubberized asphalt/polyethylene waterproofing membranes for elevated plaza and parking decks and below grade basements, tunnels, and other subterranean applications.
What is the difference between bituthene 3000 and 4000?
Bituthene 4000 is used with Primer B2 on prepared vertical and sloping surfaces as well as on suspended slab. Primer B2 can be used on ‘green’ concrete or damp surfaces. Bituthene 3000 is a flexible waterproof membrane which can be applied cold.
What is bituthene made of?
Bituthene CP A 1.5 mm thick, flexible, preformed waterproof membrane comprising a HDPE polyethylene film and a thick self-adhesive rubber / bitumen compound Self-adhesive waterproofing membrane for basements, sub-structures and flat deck applications.
Who makes bituthene?
GCP Applied Technologies’
Product Description. GCP Applied Technologies’ (“GCP”) BITUTHENE® 4000 system combines a robust, flexible, pre-formed membrane made of a high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberized asphalt compound and BITUTHENE® 4000 surface conditioner.
What is bituthene mastic?
BITUTHENE® Mastic is a rubberized, asphalt-based mastic. It has excellent adhesion to structural concrete, masonry and wood. The VOC (Volatile Organic Compound) content is 225 g/L. Architectural and industrial maintenance regulations limit the VOC content in products classified as architectural coatings.
What is post applied waterproofing?
These sheet membranes are typically applied after the concrete pour to protect structures from the ingress of water.
What is waterproofing membrane?
A waterproofing membrane is a layer of water-tight material that lies on a surface to prevent water leaks or damages. The process usually consists of liquid-applied or pre-formed sheet membranes.
How do you waterproof your foundation?
The Best Approach to Waterproofing New Foundation Walls is Poly Wall® Waterproofing Barrier Systems. Applying Poly Wall® below-grade waterproofing systems to any foundation wall with earth on one side and usable space on the other (including crawl spaces) significantly minimizes moisture-related problems to your home.
What is Preprufe?
PREPRUFE® waterproofing Advanced Bond Technology™ creates a continuous, integral and permanent adhesive bond to concrete. This seal prevents the lateral migration of water into and around the structure and provides performance for the lifetime of the structure.
How do you install Hydroduct 220?
To secure HYDRODUCT® 220 around protrusions, apply PREPRUFE® Detail Tape around the protrusion in a picture frame configuration. Cut HYDRODUCT® 220 to fit snugly around the protrusion. Press the cut edge firmly into PREPRUFE® Detail Tape. HYDRODUCT® 220 should be covered promptly.
What is positive side waterproofing?
Positive-side waterproofing by definition is applied to the outside (wet) face of the subsurface building components, by contrast to negative-side waterproofing which is applied to the inside (dry) face of the subsurface building components.
How long does a waterproof membrane last?
10 years
08 Dec How Long Does A Waterproofing Membrane Last? Quality waterproofing systems should last for at least 10 years. However, this is largely dependent on the type of waterproofing materials used as well as the workmanship of the waterproofing contractor.
What’s the best foundation waterproofing?
The 10 Best Waterproof Foundations for Summer
- Drugstore Deal.
- 2 Airbrush Flawless Longwear Foundation.
- 3 All Nighter Liquid Foundation.
- 4 Tarte Amazonian Clay Full Coverage Foundation SPF 15.
- 5 Vanish Seamless Finish Foundation Stick.
- 6 Double Wear Light Soft Matte Hydra Makeup.
- 7 BACKSTAGE Face & Body Foundation.
What is the best foundation sealer?
When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.
What is Preprufe made of?
Product Description. The GCP PREPRUFE® 275 & PREPRUFE® 275 LT membrane is a composite sheet comprised of an HDPE film, an aggressive pressure sensitive adhesive and a weather resistant protective coating.
What is Preprufe waterproofing?
What is a Hydroduct?
HYDRODUCT® 220 is a strong, preformed 0.44 in. (11 mm) thick geocomposite drainage sheet system, comprising a hollow studded polypropylene core, covered on one side with a nonwoven, needle punched polypropylene filter fabric and on the other side with a smooth polymeric film.
What is Dimple board used for?
An Effective Method of Controlling Water The DRY-UP™ Dimple Board is a very tough and long lasting plastic membrane that prevents moisture from passing through. It is also “dimpled” to allow a wall to breathe, allowing moisture to condensate outward so it falls by gravity to a drainage system.