What is cliff edge effect?
A cliff edge effect in a nuclear power plant is an instance of severely abnormal plant behavior caused by an abrupt transition from one plant status to another following a small deviation in a plant parameter, and thus a sudden large variation in plant conditions in response to a small variation in an input.
What is a design basis earthquake?
design-basis earthquake (DBE): “That earthquake for which the safety systems are designed to remain functional both during and after the event, thus assuring the ability to shut down and maintain a safe configuration.”
What is another word for cliff edge?
What is another word for cliff’s edge?
| ragged edge | bedrock |
|---|---|
| edge | limit |
| precarious position |
What is MCE and DBE?
MCE or the maximum considered earthquake is defined as the ground shaking level at the building site with a 2% probability of exceedance in 50 years, while DBE or the design basis earthquake is the level with a 10% probability of exceedance in 50 years and is assumed to be two-thirds of MCE.
What is OBE and SSE?
Enclosure 7 – Definitions: SSE (Safe Shutdown Earthquake) & OBE (Operating Basis Earthquake).
What is a cliff called?
An escarpment (or scarp) is a type of cliff formed by the movement of a geologic fault, a landslide, or sometimes by rock slides or falling rocks which change the differential erosion of the rock layers. Most cliffs have some form of scree slope at their base.
What is the face of a cliff called?
precipice. A vertical, almost vertical, or overhanging rock face; steep cliff.
What’s another word for edge of a cliff?
What is a steep cliff called?
types: crag. a steep rugged rock or cliff. precipice. a very steep cliff.
What is G in seismic?
g is the acceleration of gravity 9.8 (m/s2) or the strength of the gravitational field (N/kg) (which it turns out is equivalent).
What is the edge of a steep cliff called?
The definition of a precipice is the edge of a steep cliff. An example of a precipice is the edge of a cliff. noun.
What do you call the end of a cliff?
A ‘clifftop’ just refers to any top of a cliff.
What defines a cliff?
A cliff is a mass of rock that rises very high and is almost vertical, or straight up-and-down. Cliffs are very common landscape features. They can form near the ocean (sea cliffs), high in mountains, or as the walls of canyons and valleys. Waterfalls tumble over cliffs.
What is a rocky cliff called?
What is DBE and MCE in earthquake?
MCE or the maximum considered earthquake is defined as the ground shaking level at the building site with a 2% probability of exceedance in 50 years, while DBE or the design basis earthquake is the level with a 10% probability of exceedance in 50 years and is assumed to be two-thirds of MCE. 2.1.
What is a line of cliffs called?
5 letter answer(s) to line of cliffs SCARP.
Why do cliffs form?
In geography and geology, a cliff is an area of rock which has a general angle defined by the vertical, or nearly vertical. Cliffs are formed by the processes of weathering and erosion, with the effect of gravity. Cliffs are common on coasts, in mountainous areas, escarpments and along rivers.
What is an example of a cliff?
Cliff definition The definition of a cliff is a high steep or overhanging face of rock. An example of a cliff is the edge looking down into the Grand Canyon. A high, steep face of rock, esp. one on a coast; precipice.
What is meant by the cliff effect?
In telecommunications, the (digital) cliff effect or brickwall effect is a sudden loss of digital signal reception. Unlike analog signals, which gradually fade when signal strength decreases or electromagnetic interference or multipath increases, a digital signal provides data which is either perfect or non-existent at the receiving end.
What are seismic site effects?
Seismic site effects are related to the amplification of seismic waves in superficial geological layers. The surface ground motion may be strongly amplified if the geological conditions are unfavorable (e.g. sediments).
What is the cliff effect in telecommunications?
In telecommunications, the (digital) cliff effect or brickwall effect is a sudden loss of digital signal reception.
How does layering affect the amplification of seismic motion?
This phenomenon may significantly strengthen the amplification of the seismic motion. The aggravation of the amplification level when compared to the case of horizontal layering may be up to a factor of 5 or 10. It depends on the velocity contrast between the layers and the geometry of the basin.