What is protection board construction?
CCW Protection Board H is a heavy-duty asphalt-impregnated organic mat with a fine mineral applied to the surface to prevent sticking in the roll. CCW Protection Board-H is very tough and provides positive protection to the waterproofing membrane during installation of other work.
What is protection board used for?
Protection Board is a semi rigid board containing blended bitumens and minerals reinforced with cellulose fibres, heavily compressed. Used to provide protection for waterproof membranes against mechanical damage by backfilling and foot traffic.
What to put on floors to protect during construction?
Apply Painter’s Tape to Non-Adhesive Floor Coverings If you use a temporary floor covering that doesn’t have an adhesive, you can use blue painter’s tape to keep it from sliding against the surface. This adhesive material can protect your flooring from paint spills and pressure from moving heavy equipment.
What is Builder board used for?
Builder Board™ Heavy-duty floor protection designed for commercial and residential contractors. Builder Board replaces the need for large, bulky sheets of masonite and rolls out flat. Protect floors from spills, drops and more.
What is roofing Protection Board?
A cover board is a thin substrate to which a roof membrane is adhered. However, the use of a cover board far exceeds that of a substrate — it also serves as a critical component that helps to extend the life of a roof.
What is protection course?
PROTECTION COURSE is a multi-ply, semi-rigid core composed of a mineral-fortified asphalt core formed between two outside layers of asphalt-impregnated reinforced mats, manufactured in accordance with ASTM D 6506.
What is a roof Protection Board?
Roof Cover Boards Act as a Thermal and Fire Barrier In addition to their use as a substrate for the membrane, cover boards can also be installed as: A thermal barrier – which is when the cover board is installed directly to the deck to enhance internal fire resistance.
What is ISO board roofing?
Polyisocyanurate thermal insulation, also referred to as polyiso, PIR, or ISO, is a popular low slope commercial building roof insulation. It is a thermoset, closed-cell foam that is an optimal insulation solution for low slope roofs. It can also be used as a roofing cover board and in building envelope applications.
What is a RAM board?
RAM BOARD® FLOOR PROTECTION Ram Board is a heavy-duty, temporary floor protection engineered for contractors. Designed with cost and efficiency in mind, it lays out fast and is re-usable. Ram Board is non-staining and utilizes Vapor-Cure™ technology, allowing for the proper curing of new floors on the jobsite.
How do you protect a subfloor in construction?
If stored outside, cover panels with plastic sheets or tarps. Keep cover open and away from the sides and bottom of the panels to allow for air circulation. Space units at least 4-inches on all four sides. Protect edges to avoid damage to the tongue-and-groove profile.
What is Builder board made of?
The boards are made of super high quality 1/2″ exterior-grade birch plywood, sanded perfectly smooth to the touch, with the option of a durable non-toxic finish for inside or outside.
What is RAM board made of?
% reclaimed paper
Ram Board is made of 100% reclaimed paper, which contains a minimum of 90% postconsumer material. Ram Board is committed to being good stewards of the environment. We have met the high standards of the FSC® certification process and have been approved by the Scientific Certification System.
What is a roof cover board made of?
The most common are: Gypsum Fiber: A fiber-reinforced, uniform composition cover board that can be used in most roof applications. Gypsum-fiber cover boards typically provide unmatched wind uplift and hail performance, higher than any other cover board, with no risk of facer delamination.
What is a drainage board?
Drainage boards allow water that has reached the walls of a structure to flow harmlessly away. Without drainage boards, water can saturate a building’s walls or pool around its foundation.
Can you use fiberboard for roofing?
Durable and dependable, fiberboard roofing substrate helps you stay on top of any roofing application. As basic as a standard built-up roof, yet as current as today’s single-ply systems, fiberboard is durable and consistent, easy to handle, easy to apply, and lasts for years in both re-rof and new applications.
What is ISO board made of?
Polyiso, or iso, is a high-performance insulation solution used in a multitude of applications, most notably, in this instance, residential and commercial roofing. Polyiso is short for polyisocyanurate, a rigid insulation board made of closed-cell foam.
What is EPS insulation board?
What is EPS? Expanded Polystyrene Insulation, more commonly referred to as EPS, is a closed cell insulation that has been around since the 1950’s. EPS is made of 98% trapped air and only 2% plastic, making it an efficient insulator with a small amount of raw material.
Can Ramboard get wet?
What Can Ram Board and Other Temporary Surface Protection Guard Against? Ram Board and other temporary surface protections should be non-staining, so nothing will transfer from their surfaces to the floor underneath, even if it gets wet.
Can builder board be used for floor protection?
Builder Board is now equipped with Liquid Shield technology making it a water resistant temporary floor protection choice. Builder Board heavy duty paperboard can be used for floor protection during construction is manufactured from 33% post consumer material and is reusable.
What is Pb4 waterproofing protection board?
After the waterproofing membrane is applied to the foundation, protect it from damage during backfilling with PB4 Waterproofing Protection Board. This durable extruded polystyrene (XPS) board has the compressive strength and impact resistance to withstand even the toughest load pressures.
What is Protecto-board used for?
Protecto-board is particularly useful for cutting and shaping around details such as outlets and upstands. Protecto-board can be fixed to the vertical plane by torch bonding to the surface beneath, mechanically fixing or by securing with strong double-sided bitumen Protecto-tape.
How do you use Protecto Board on a deck?
Can be fixed by butting joints together and securing with spot bond adhesive or taping over joints with strong double-sided bitumen tape (for horizontal decks) Protecto-board is particularly useful for cutting and shaping around details such as outlets and upstands.