What is the back part of a fireplace called?
Nowadays we tend to refer to the mantel and mantel shelf as simply, the mantelpiece. It originated in medieval times when firepits started to be built into a homes living areas to help keep everyone warm (the mantel served as a hood that would prevent smoke from entering the room, diverting it back into the chimney).
What is a fire back panels?
A fireplace back panel is the part of a fireplace located between the fireplace opening and the surround. The back panel typically compliments the design, color and material of the hearth, and can be often purchased together.
What material is the back of a fireplace?
That is a fireback and it does more than just decorate. Firebacks are heavy iron or steel plates sized in proportion to fireplaces and are placed against the wall at the back of the fireplace.
What is a fireplace wall called?
Mantel. The mantel is the top horizontal protruding shelf/ledge over a firebox. A fireplace mantel spans the top of a firebox and is often supported by legs; generally the deepest and heaviest section of the fireplace.
What is a fireplace jamb?
Wall projecting from the back to form one side of the enclosure of a fire-place, carrying the arch, bar, mantle, or tree.
What is a back hearth?
A back hearth is the section of a fireplace hearth that is actually inside the chamber where the fire will be built; is the essentially the floor of the inner hearth. A back hearth is typically made of concrete, though it can be made from other non-combustible materials such as brick or stone.
What are the names of the parts of a fireplace?
At the base of the firebox is the hearth, and at the top of the firebox is the throat of the chimney, where a damper can be found in some fireplaces. The front of the firebox is called the fireplace opening, where glass doors can sometimes be found, or where a fireplace screen would be located.
What are the parts of a fireplace surround called?
The fireplace mantel comes in two major parts: the lower mantel and the optional overmantel. The main parts of a lower mantel include the shelf, legs, header, inner trim, and hearth. The main parts of the overmantel are crown and wall cladding tiles.
What jamb means?
Definition of jamb 1 : an upright piece or surface forming the side of an opening (as for a door, window, or fireplace) 2 : a projecting columnar part or mass.
What is a jamb in construction?
The term ‘jamb’ typically refers to the vertical up-right components that form the sides or of door or window frames.
What is a fireplace panel?
If you have a prefabricated fireplace, commonly known as a factory-made fireplace you have refractory panels on the sides and bottom of your firebox. These panels are made to withstand heat and add strength and durability to the fireplace.
What is the area around the fireplace called?
Hearth. Called the outer hearth or hearth extension, this is the area in front of the firebox or inner hearth that’s made of brick or tile to reduce the risk of fires. Fireplace Face. The fireplace face or surround is the part of the fireplace surrounding the firebox that you see in the room.
What are the sides of a fireplace called?
Mantel—a shelf that hangs over the top of the fireplace opening. If the mantel surrounds the entire opening of the fireplace, the vertical sides are called pilasters or legs with plinths at the bottom.
What is the outside of a fireplace called?
Fireplace Face. The fireplace face or surround is the part of the fireplace surrounding the firebox that you see in the room. It’s made of brick, stone, concrete or other noncombustible materials. Its purpose is to ensure the area outside the inner hearth doesn’t catch fire.
What is the full name of JAMB?
The Joint Admissions and Matriculations Board (JAMB) is a Nigerian entrance examination board for tertiary-level institutions….Joint Admissions and Matriculation Board.
| Official logo | |
|---|---|
| Founded | 1978 |
| Type | Examination board |
| Purpose | Admission into tertiary institution. |
| Location | Nigeria |
What’s the difference between JAMB and UTME?
JAMB is a body that conduct the exam called UTME. The body was empowered by Federal Government to conduct matriculation examinations for entry into all polytechnics and colleges of education in the country and to place suitably qualified candidates in the available places in these institutions.
What is a jamb wall?
Our tip: a jamb wall is a clever solution which enables you to push furniture such as a bed right up to the wall without leaving a gap. Or make maximum use of the space and install shelves or a cupboard. Whether open, with doors or even a curtain, you can turn even the smallest niche into an attractive, useful space.
What is a fireplace back panel?
A fireplace back panel is the part of a fireplace located between the fireplace opening and the surround. The back panel typically compliments the design, color and material of the hearth, and can be often purchased together.
What are the parts of a fireplace&chimney?
Parts Of A Fireplace & Chimney Explained (With Diagrams And Real Pictures) 1 Parts Of A Fireplace Diagram 2 Anatomy Of A Fireplace (Labeled) 3 Firebox 4 Hearth 5 Fireplace Face 6 Surround 7 Back Panel 8 Mantel 9 Lintel 10 Chimney Throat
What is the bottom part of a fireplace called?
Plinth The lowest part of the leg on a fireplace or often times referred to as the “foot” is called the plinth. This decorative transition piece between the leg and the hearth is often times also referred to as the base of the fireplace.
How do you remove the back panel of a fireplace?
Depending on the type of fireplace, the back panel can be unscrewed from the wall and removed, or may require further work to remove if there is a seal between the back panel and the wall.