What is the difference between a genoa and a jib?
A jib is a foresail that does not extend aft beyond the mast; a genoa, on the other hand, is larger and will overlap the mast and part of the mainsail. A jib sail is used for strong winds and is easy to handle, while the genoa is perfect for downwind sailing in light winds.
What is a genica?
Beta Genica-8™ is a nutritionally complete premium infant formula suitable for healthy infants from birth requiring a partial or complete breast milk substitute. Cognition.
What is the mizzen sail?
A mizzen sail is a small triangular or quadrilateral sail at the stern of a boat. A steadying sail is a mizzen sail on motor vessels such as old-fashioned drifters and navy ships (such as HMS Prince Albert). The sail’s prime function is to reduce rolling rather than to provide drive.
What is a cruising chute?
A cruising chute, also known as an asymmetric spinnaker, is one that has its tack and clew at different heights. The sail flies from a bowsprit, projecting the sail’s tack beyond the pulpit so that its foot doesn’t foul.
What is the purpose of a gennaker?
The gennaker is a specialty sail primarily used on racing boats to bridge the performance gap between a genoa and a spinnaker. It is sometimes the only downwind sail on board because it is easier to use and less expensive than a spinnaker. Due to its geometry, the sail is less prone to collapsing than a spinnaker.
What is a drifter sail?
Drifters are a hybrid designed specifically for cruising sailors. Its wind range is from 1-15 knots when the apparent wind angle is 30-90 degrees. It can be used on a run when set wing-and-wing with a whisker pole. A Drifter is even easier to use than a cruising spinnaker since the sail has the same profile as a genoa.
What is a staysail ketch?
With the total sail area split between 3 sails (or 4 in the staysail ketch version shown below), sail handling is easier for a shorthanded crew than it would be on a sloop of similar size. Some ketches, particularly larger ones like this one sport a cutter rig and are then known as a ‘staysail ketch’.
What is a code 3 sail?
Code 3 is a medium air reaching sail, used for apparent wind angles near 90 degrees. Code 4 is a heavy air running sail, used in the heaviest winds normally expected. Code 5 is a heavy air reaching sail, used in the heaviest winds normally expected. Code 6 is a storm sail, for running in storm conditions.
What is a Ballooner sail?
Definition of balloon sail : a large light sail (such as a spinnaker) set in addition to or in place of an ordinary light sail especially by yachts in moderate weather.
Why is a rope called a sheet?
Old English apparently. “rope that controls a sail,” O.E. sceatline “sheet-line,” from sceata “lower part of sail,” originally “piece of cloth,” from same root as sheet (1) (q.v.). The sense transferred to the rope by 1294. From Online Etymology Dictionary.