What is the pultec EQ trick?
This trick has become known as the ‘low-end trick’. On a bass drum, for example, if 30Hz is simultaneously boosted and cut, the curve created gives a boost at 80Hz with a dip at around 200 Hz – a very pleasing curve on some bass drums. The sound can be sweetened further using the high-frequency controls.
What is attenuation EQ?
[ə‚ten·yə′wā·shən ′ē·kwə‚līz·ər] (electronics) Corrective network which is designed to make the absolute value of the transfer impedance, with respect to two chosen pairs of terminals, substantially constant for all frequencies within a desired range. Also known as attenuation factor.
What CPS pultec?
The low-band frequency choices on Pultec EQs (CPS stands for cycles per second. 1 CPS is equivalent to 1Hz). For example, even if you set the low band for 30Hz, the shelf is so broad that it impacts up to the 1000Hz area. Likewise, the high band affects frequencies down to the lower midrange.
What frequency should I boost?
Boost: For a more ‘plucked’ sounding bass part. Apply boost at around 6KHz to add some definition to vocal parts and distorted guitars. Cut: Apply cut at about 3KHz to remove the hard edge of piercing vocals. Apply cut between 5KHZ and 6KHz to dull down some parts in a mix.
How can I get my vocals thicker?
How to Thicken Your Lead Vocal
- Create up to 4 additional voices with the Wave Stereo Doubler.
- Subtly increase the quieter aspects of your vocal with a low level compressor.
- Create a concise reverb with quick reflections and a short reverb time.
How do you EQ perfectly?
- Tip 1 – Have an intention.
- Tip 2 – Don’t rely on EQ alone, especially to shape the tone.
- Tip 3 – Prioritize cuts, but still use boosts.
- Tip 4 – Avoid applying EQ in solo.
- Tip 5 – Small changes soon add up.
- Tip 6 – Be more subtle with stock parametric EQs.
- Tip 7 – Don’t obsess over plugin order.
How many LUFS should my master be?
The best mastering level for streaming is an integrated -14 LUFS, as it best fits the loudness normalization settings of the majority of streaming services. Although other measurements like the true peak value and other metrics need to be considered, -14 LUFS is the best mastering level when considering loudness.
What dB should final mastering?
How loud should your master be? Shoot for about -23 LUFS for a mix, or -6db on an analog meter. For mastering, -14 LUFS is the best level for streaming, as it will fit the loudness targets for the majority of streaming sources, but it’s okay to go louder (-7 to -10) so that your music stacks up well on other mediums.
Why do my vocals sound so thin?
In fact, thin mixes usually come from a poor arrangement. But sometimes they can come from a poor use of EQ, too. When you prevent and address thinness in your track, you can produce a mix that’s more powerful and impactful. You never want an important chorus to sound thin – the music will lose it’s impact.