What kind of oil craftsman weed wacker?
According to Manuals Online, Craftsman trimmers take SAE 30 motor oil, which is the same type of oil you put in your car.
What spark plug does a 25cc Craftsman weed eater take?
Craftsman recommends Champion brand small engine spark plugs.
What is the oil gas ratio for a craftsman weed wacker?
All Weed Eater brand two-cycle gas trimmers use a 40:1 ratio of gas to oil. That’s equal to 3.2 ounces of oil to 1 gallon of regular gas.
Does a weed wacker need oil?
All Weed Eater two-cycle products require oil to be added to the gas. Unlike engines that have separate gas and oil reservoirs, two-cycle engines run on a gas/oil mixture that keeps the engine lubricated at all times. Never use straight gas in a two-cycle engine as straight gas will ruin the engine within minutes.
How often should you change the spark plug in a Weed Eater?
approximately every 100 hours
As a general rule, you should change the spark plug approximately every 100 hours.
What size string does a Craftsman weed eater use?
0.065- Inch
CRAFTSMAN String Trimmer Line, 0.065- Inch, 3-Pack Spools, 30 Foot (CMZST0653)
Are weed wacker spools universal?
While there is no universal cap and spool mechanism, the differences aren’t that great, and if you can restring one weedwacker, you can probably restring any other.
How do I mix gas oil for a weed wacker?
The fuel-oil mixture ratio for all Weed Eater products is 40:1. You can obtain this ratio by mixing 3.2 oz. of two cycle air cooled engine oil with one gallon of regular gas. Over a period of time oil will separate from gasoline.
What gas do I put in my weed wacker?
Our units run on 87 octane regular unleaded gasoline. You can use gasoline which is blended with a maximum 10% alcohol. Never use E85 or diesel fuels. Remember to use fresh gasoline and to mix it with the recommended 2-cycle oil.
What is the gas to oil ratio for a weed wacker?
All Weed Eater brand two-cycle gas trimmers use a 40:1 ratio of gas to oil. That’s equal to 3.2 ounces of oil to 1 gallon of regular gas. The gas should be 87 octane with no more than 10 percent alcohol. The oil must be formulated for two-cycle engines.
How many CC’s is the Craftsman Weedeater?
Trim more grass in less time with the CRAFTSMAN® WS2200 WEEDWACKER® Gas Trimmer. Featuring a lightweight and easy-to-use 25 cc, 2-cycle engine, this trimmer is equipped with a 17 in. cutting width to tackle the job at hand with fewer passes.
How long does a craftsman D Gas Powered weedwacker line trimmer last?
For one year from the date of purchase, when this Craftsman D Gas Powered Weedwacker Line Trimmer is maintained, lubricated, and tuned up according the operating… Page 3 • Allow engine to cool; secure unit be- • Use only 0.080 inch (2 mm) diameter fore storing or transporting in vehicle.
How big is the engine on a craftsman Trimmer?
Featuring a lightweight and easy-to-use 25 cc, 2-cycle engine, this trimmer is equipped with a 17 in. cutting width to tackle the job at hand with fewer passes. Work efficiently with Easy Start Technology for simpler pull starts and an easy winding bump head that releases .095 in. of line with just a bump of the trimmer head.