What size are skateboard truck axles?
These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16″.
What size are skateboard truck holes?
3/16″
A 3/16″ drill bit will give you a nice tight fit for the standard truck hardware. You can also go up to a 13/64″ drill bit if you find it too tight of a fit.
How far apart are skateboard truck holes?
Longboard and skateboard deck manufacturers all use one of two trucj mounting hole standards – or combine both : Old School pattern: the holes are spaced apart 2.5″ along the length of the deck, and 1.625″ along the width. This pattern was used by all the skateboard truck manufacturers in the 70’s.
Are both skateboard trucks the same?
Unfortunately, the sizes of skateboard trucks are not standardised. So you won’t get confused by the 129, 139 and 149 sizes from Independent Trucks or 147 and 149 sizes from Thunder Trucks, we’ve compiled an overview for you. You can use the size chart below to easily find the right size.
What size is skateboard truck hardware?
The right size hardware for skateboard is 7/8″ for standard 7-ply decks without riser pads. 1/8″ riser pads require 1″ hardware and 1/4″ risers require 1 1/8″ hardware. Sometimes trucks have a thicker baseplate and 1″ is a better option. Both 7/8″ and 1″ flathead countersunk bolts always work.
Why do my skateboard trucks have 6 holes?
The extra 2 hole in a baseplate with 6 holes are for old school skateboard decks. Pivot Cup: The small urethane cup that fits in an indentation in the baseplate to help the trucks turn. They will eventually wear down and make the trucks more unstable so it is important to keep an eye on this part.
What size trucks fit an 8.25 board?
Size Guide – Skateboard Trucks
| Skateboard Truck Size Guide | ||
|---|---|---|
| Deck Size | Hanger Width | Destructo |
| 7.5 to 7.75″ | 127mm / 5″ | 5 |
| 7.75 to 8.25″ | 137mm / 5.25″ | 5.25 |
| 8.25 to 8.75″ | 149mm / 6″ | 5.5 |
What size hardware do I need for an 8.0 deck?
There is no correlation between the size (length) of your deck and hardware size. If you skate and 8.0″ deck, you still can use 7/8″ hardware without risers.
Are all skateboard kingpins same size?
The more you tighten and loosen your trucks, the more the kingpin nuts wear out and lose their ability to stay tight. These kingpin nuts are the standard size and will fit on most skateboard/longboard trucks that have standard kingpins. The thread size for these kingpin nuts is 3/8″ (standard).
What size trucks do 8.25 Need?
Which trucks do I need? If you’re setting out to buy new trucks, you’ll find that each brand labels trucks differently. That means if you ride an 8.25-inch board then you’d need Independent 144s, Thunder 148s or Venture 5.6s (each have an axle length of 8.25-inches).
How big should my skateboard hardware be?
An easy rule of thumb on most skate decks is to add 1″ to your riser size to determine the correct hardware size (add 1 ¼” to your riser size on thicker boards).
Is all skateboard hardware the same?
Hardware comes in a couple different styles. The most common are phillips or allen-head hardware. They function exactly the same, but with the allen hardware you’ll need an 1/8 inch allen wrench to tighten them. Most allen hardware sets come with the proper wrench.
What are the parts of a skateboard truck?
Skateboard Trucks: Parts Which parts has a skateboard truck? Typically, skateboard trucks consist of a base plate, hanger (the movable and grindable part of the truck to which your wheels are attached), the kingpin and kingpin nut which hold these two pieces together, as well as the bushings and the washers.
How to choose the right size trucks for your skateboard?
The most basic way to size your trucks is to match the length of the axle to the width of your skateboard. If you’re buying your first customizable skateboard, first find out what size skateboard is right for you before choosing trucks. It’s important to have the right size trucks on a skateboard in order to have full stability for the rider.
What is a base plate on a skateboard?
The base plate is the base layer, or foundation, of the truck. It’s mounted to the skateboard with 4 bolts. The kingpin and the pivot cup can be found in the base plate. The kingpin is a bolt that connects the hanger to the base plate.
What size skateboard wheels do I Need?
Mid or standard trucks are basically a compromise between low and high trucks and are therefore ideally suited for all-around skateboarding and for anyone who cannot decide. Skateboard wheels between 52 mm and 56 mm are a good fit for mid/standard trucks.