What size string does a Black and Decker weed eater use?
.065 inch diameter
Designed for use with Black & Decker auto feed string trimmers, the 30 foot factory wound replacement spool features a . 065 inch diameter line utilizes centrifugal force to automatically feed the cutting string while eliminating bumps and hitches.
Do you soak weed eater string?
Here it is, never leave your string in direct sunlight, and especially during the summer months soak your string in water. You see, soaking your string in water will prevent deterioration from heat, and keep your string ready for weed whacking action!
How long does weed eater string last?
You should replace trimmer string spools once every 90 to 180 days if you use the trimmer weekly. Overusing the trimmer string greatly increases the chance of it breaking while you’re using it. If you don’t replace it often enough, the ends will fray, and it won’t chop through the weeds.
How much string do you put in a weed eater?
Push about 1/2-inch of one end of the string in the hole, so the hole holds the string in place while you load the spool. If your weed eater uses two strings, the spool should have two sections separated by a divider, with a hole in each section. Wind one piece of string at a time in two-string weed eaters.
How does a bump head trimmer work?
With a bump feed weed eater, when you press the head of your trimmer against a flat surface, it squeezes a spring in the head of the string trimmer. This action releases string from the spool so you have a line with which you can cut down debris.
Who make Kobalt Tools?
Kobalt is a line of hand and mechanics’ tools, power tools, and tool storage products owned by the American home improvement chain Lowe’s. It is the house brand for both Lowe’s in North America and their joint venture with the now defunct Masters Home Improvement in Australia.
How long should weed eater line last?
A trimmer line should last about three to six months if you cut the weeds weekly. A high-quality trimmer line spool lasts longer than low-quality strings, but it also depends on how often you trim the weeds. Soak your trimmer line in water to make it last longer.
How long should the string be on a weed eater?
about six inches
You need to leave about six inches of string hanging from the spool when you are done adding your new string. You should use a heavy-duty pair of scissors to snip the string. Then replace the cap.
When should I change my weed eater line?