What speakers are in DC10?
In the main room at DC10, the new system was designed with an L/C/R configuration consisting of 4 x Loud Professional Formula F215’s, 4 x Loud Professional VH Sub121Hs, 8 x Loud Professional VH Sub118Rs and 4 x Loud Professional VH F15’s; while the DJ Booth is rigged with 4 x Loud Professional VH F15’s and 2 Loud …
What is VD speaker?
Vd. This parameter is the Peak Diaphragm Displacement Volume in other words the volume of air the cone will move. It is calculated by multipying Xmax (Voice Coil Overhang of the driver) by Sd (Surface area of the cone). Vd is noted in cc. The highest Vd figure is desirable for a sub-bass transducer.
Who owns DC10?
Throughout the years, the four entrepreneurs have grown DC10 to such a level, that it has now become a reference point for the world of what the Ibiza music scene has to offer….
| Circoloco | |
|---|---|
| Venue | DC10, etc. |
| Years active | 1999–present |
| Organised by | Circoloco |
| Website | Circoloco on Facebook |
What is QTS speaker?
Qts is the total Q of the speaker and is derived from an equation where Qes is multiplied by Qms. The result is divided by the sum of the same. This value can be used as a general guideline in selecting the optimal enclosure type. A Qts of 0.4 or below indicates a speaker well-suited to a vented enclosure.
What is Xmax speaker?
Xmax is the amount by which the voice coil can move in one direction without it leaving the magnetic zone. If excursion is increased even further, the back of the voice coil former will eventually slam into the magnet, risking permanent damage to the driver.
Are DC-10 still in use?
Operators. As of April 2022, there were 9 DC-10s and MD-10s in airline service with operators FedEx Express (8), and TAB Airlines (1). On January 8, 2007, Northwest Airlines retired its last remaining DC-10 from scheduled passenger service, thus ending the aircraft’s operations with major airlines.
What is QTS and QES?
The Qes is a measure of the electromechanical damping caused by voice coil resistance and the interaction of the voice coil in the magnetic gap. A higher Qes means less electromechanical damping or a smaller magnet. The Qts is the total damping which is the combination of mechanical and electromechanical damping.
What is XMax on a subwoofer?
XMax = The distance a subwoofer voice coil can move in one direction without leaving the magnetic zone a.k.a. how far the woofer can move.
Is xmax important subwoofer?
Subwoofer Efficiency Xmax could suffer as a result. Subwoofer B can’t take as much power but it’s cone assembly is lighter and therefore, it’s XMax could be as good or better than Subwoofer A thus moving more air. It’s called efficiency.
What is QTS subwoofer?
What does DC Audio mean?
DC (direct current) is of the non alternating or periodic variety and thus has no constructive purpose as part of an audio signal.