Which is correct for 74ls08 IC?
74LS08 IC is a member of 74XXYY IC series. There are four AND gates in the chip and each gate have two inputs, hence the name QUADRUPLE 2- INPUT AND GATE….74LS08 Pin configuration.
| Pin Number | Description |
|---|---|
| SHARED TERMINALS | |
| 7 | GND- Connected to ground |
| 14 | VCC-Connected to positive voltage to provide power to all four gates |
How do logic gates connect to breadboards?
logic gates with transistors Circuit Diagram Connect the collector pin of the transistor with the negative rail. Attach the emitter pin of the transistor with the positive rail via a 220-ohm resistor and connect the positive leg of the LED to this junction. Join the negative leg of the LED with the negative rail.
What is a 7408 integrated circuit?
IC 7408 is a logic gate chip with four two-input AND gates. Each of the four AND gates are independent. Each gate has one output, two inputs and three pins. The AND gates carry out logic AND operation. Logic gates are available in the form of ICs.
What is the output pin in IC 74LS08?
Pin 5 will be used to give the second input to the second AND gate in IC 74LS08. Pin 6 will be used to receive the output of second AND gate from IC. Pin 7 is a ground pin; it will be used as common ground by other communication devices with IC and Power Supply.
How many pins are there in a regular 74LS08 chip?
74LS08 Pinout This IC has 14 pins, each of which is described below along with its function.
How many pins are in AND gate?
Typically, standard logic gates are available in 14 pin or 16 pin DIL (dual in line) chips.
What is a 74LS02?
The 74LS02 is a TTL (Transistor to Transistor Logic) which uses low power Shottky transistors to reduce the stored charge and get higher switching speeds than with conventional bipolar transistors. 74LS02 is a 14 pin IC that has four NOR gates each NOR gate has two inputs & one output.
How many input and output does a 74LS08 IC have?
Quadruple Two Input AND Gate Features. The IC has low power consumption. IC 74LS08 has a much fast operating speed. It comes in multiple packages, SOIC, PDIP, and SOP.
How many logic gates are in a 7408 chip?
four independent gates
The 7408 is a QUAD 2-Input AND gates and contains four independent gates each of which performs the logic AND function.
How many inputs can a NOT gate have?
one input
A logical inverter, sometimes called a NOT gate to differentiate it from other types of electronic inverter devices, has only one input. It reverses the logic state. If the input is 1, then the output is 0.
How many transistors are in a NOT gate?
A NOT gate is 1 transistor. A NAND gate is 1 transistor per input.
What is 74ls08 two input quadruple and gate?
74LS08 Two Input Quadruple AND Gate IC 74LS08 is a Quadruple 8-bit Two Input AND IC. Gate AND gate is a digital circuit used to convert the logic state to a specific logic. In AND gate two logics state signals are used.
What is 74ls08 IC?
The gates in the chip are designed by SCHOTTKY TRANSISTORS for high speed logic operations. 74LS08 is a 14 PIN IC. The chip is available in different packages and is chosen depending on requirement.
What is the operating voltage range of the 74ls08 pins?
The description for each pin is given below. Operating voltage range: +4.75 to +5.25V Note: Complete technical details can be found in the 74LS08 Datasheet linked at the bottom of this page.
What is the rise and fall time of IC 74ls08?
IC 74LS08 has 18ns Rise and Fall time. It can operate in the temperature range from 0 to 70 degree but it also has the ability to store the temperature of -65 to 150 degrees. A single IC gives four AND gates.