Why is printer not feeding paper?
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Why does my Epson printer Say No paper when there is paper?
Using incorrect or incompatible paper will prevent your printer from feeding it properly. The printer will instead recognize it as “out of paper,” thus resulting in the error. Try loading the correct media into the paper tray and be sure to align them at all times.
How do you clean a paper pickup roller?
Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture. Put the paper support firmly back in the machine.
How do you lubricate printer rollers?
Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth. Press the cloth against the rollers and rotate them upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.
Why does my Epson printer keep jamming?
This error occurs when top/bottom of paper is not detected by ASF PE Sensor or PE Sensor in the specified steps of paper loading / ejecting operation correctly. 1 Push “Start” button after the jammed paper in printer mechanism is removed.
How do I fix my Epson document feeder?
If the Automatic Document Feeder is open, close it and then try again. If the Automatic Document Feeder is already open while you are scanning, remove any jammed paper; reload any document not yet scanned and then restart EPSON Scan.
How do you clean ADF rollers?
Turn the rollers and gently clean them with a soft, lint-free cloth slightly moistened with mild alcohol. After the rollers have been cleaned, wipe the rollers with a soft, dry, lint-free cloth until they are completely dry.
Why does my printer keep getting a paper jam?
It could be that the paper you are trying to print on is damp. The paper could be of low quality or not the type designed to be used with your specific printer. A printer jam can also occur when you load the paper incorrectly, or when there is dust and static present on the paper.
Why does my ADF keep jamming?
Make sure you do not load the ADF beyond its capacity for your paper size. Also make sure your originals are not creased or folded, and do not contain holes, staples, tape, or other materials that could obstruct the feeder.